Parts
While a majority of the parts used on these lasers are universal, most of them will be hard to come by at your local stores. Below I have complied a list of parts that commonly fail along with online retailers who specialize in parts for these machines.
Common Repair Parts. Below is a list of parts that commonly fail, as well as, other popular parts.
Electrical Tape (High Voltage)
High Voltage Wire Connector or High Voltage Wire Connector (for Laser Tube)
Laser Tubes (Note: Tubes have a shelf-life)
Laser Tube Extensions (Designs for 3D Printer)
Power Supply: 24V (Click here for wiring diagram)
Power Supply: Laser w/ Digital Display: 60W or 80W or 100W or 150W
Proximity Sensor Switch (AKA Limit Switch)
Power Switch - Push Button (1NO 1NC)
Water Flow Sensor (8mm): Plastic or Metal (eBay) or Metal (Amazon)
Retailers Specializing in Replacement Laser Parts. Below is a list of popular retailers with a wide selection of replacement parts.
Genuine S&A Chiller Parts. Below is a list of commonly replaced parts in genuine S&A Chillers. Specifications are subject to change, so verify parts before ordering.
Service Manual | S&A N/A | Models: CW-5000/5200
0.5A Power Supply | S&A GM42-240160-D | Models: CW-3000/5000
1.5A Power Supply | S&A GM48-240200-D | Models: CW-5200/6000
T-503 Controller | S&A T503 | Models: CW-5000/5200
HL Flow Switch | S&A HL-30 | Models: CW-3000/5000/5200
Flow Switch | S&A L-50A | CW-3000/6000
Temperature Display | S&A 2W-WTB | CW-3000
50W Water Pump | S&A P2450 | CW-5200DH & CW-6000
25W Water Pump | S&A P2430 | CW-3000DG & CW-5000DG